Changing The Door Handle; Fitting The Wall Spacer; Aligning The Appliance - Bosch GSN36VW30 Mode D'emploi

Changing the door
handle
(if required)
Fig. " A/B
Change the door handle in numerical
sequence.

Fitting the wall spacer

Fig. %
If available:
Fit wall spacers to obtain the indicated
energy absorption of the appliance.
A reduced wall gap will not restrict
the function of the appliance. The energy
absorption may then change slightly.

Aligning the appliance

Place the appliance in the designated
location and align. The appliance must
be level. If the floor is uneven, use
the front height-adjustable feet. Adjust
the height-adjustable feet with a wrench.
Note
The appliance must be upright. Please
align it with a spirit level.
SW 22
en
5