Cleaning Steam Or Powersteam Outlet - HGZ S400 Mode D'emploi

Figure 15

Cleaning steam or Powersteam outlet

If the coffee machine ist equipped with a steam or a powersteam outlet, the outlet must
be removed every evening. The cleaning takes about 2-3 minutes. When working with
steam or power steam, the polished parts can get very hot!
1. Fill the milk jug with 0.7 litre of cold water and add approx. 60 ml Rex-Royal Cap-
pucleaner (57´045).
2. Unscrew the steam nozzle from the steam pipe (Fig. 15) and place it into the jug.
3. Hold the steam outlet by the black handle and plunge the steam pipe into the jug
(Fig. 16).
4. Press the steam key. The steam will stop automatically when the seted milk tempe-
rature is reached.
5. Deposit the steam outlet and the steam nozzle in the hot cleaning solution and leave
them to soak (ideally overnight).
6. Remove the steam nozzle from the container and clean it thoroughly with warm
water and a brush. Make sure that no milk deposits collect in the steam outlet ope-
nings (Fig. 17).
7. Rinse and clean the jug thoroughly with warm water and the brush supplied
(57´370).
8. Finally, screw the steam nozzle back to the steam outlet (Fig. 15)
68
Figure 16
Figure 17
S400 - Operating Instructions S400 - Operating Instructions