Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Unpacking and assembly
Unpacking
Unpack the device and check for completeness.
See also: ☞ disposing of packaging – Page 24.
Scope of supply
• Mini-Portable circular saw
• Operating instructions
• Suction hose
• Suction nozzle
• Adapter
• Saw blades (3x)
• Parallel limit stop
• Cutting aid
• Tool
• Carrying bag
Notice:
If any item is either missing or damaged,
please contact your seller.
Assembly
WARNING
Risk of injury!
Before working on the device, always
unplug (device without power).
Assembling the saw blade
WARNING
Risk of injury!
Always follow the direction of rotation of
the saw blade when installing.
WARNING
Risk of injury!
When assembling the saw blade guard,
make sure that the spring (19) presses
on the saw blade guard.
– Saw blades (14) are fitted on the shaft.
Comply with the prescribed installation of the
saw blades.
– Press and hold the spindle lock (7).
– Screw in the shaft (15) in a counter clockwise
fashion while holding the spindle lock (7) and
tighten with a suitable tool.
– Secure the saw blade guard (2).
– Screws (13) into the saw blade guard (2) and
push device.
Notice:
The square of the screws (13) must be
introduced in the socket of the device.
EN
19
Publicité
Table des Matières
