Cleaning And Maintenance - WMF KULT X Mode D'emploi

Cleaning and maintenance

Clean all parts immediately after use and remove any food residue straight away.
Never wash or rinse the motor! Do not immerse it in water! Always remove the the mains plug before
cleaning.
Risk of injury! The cutting blades and discs are sharp! Do not touch! Be
careful when cleaning the cutting blades and discs!
Do not use any corrosive, alcohol-based or caustic cleaning products or utensils containing solvents
(e.g. scouring pads or similar) These could scratch the surface.
The individual parts must be completely dry before use.
Dishwasher safe
Stopper (1)
Lid (2)
Drive shaft (3)
Preparation
container (4)
Motor unit (5)
Stainless steel
blade (7)
Strip cutting
disc (8)
Cutting / grating
discs (9 and 10)
Kneading blade
(11)
Can be rinsed Wipe with a
under running damp cloth
water
17