Replacing The Airclean Filter; Exchanging Exhaust Filters; When To Change The Hepa Airclean 30 Exhaust Filter; When To Change The Thread Catcher On The Standard Floor Brush - Miele Classic C1 Instructions D'utilisation

Masquer les pouces Voir aussi pour Classic C1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Replacing the AirClean filter

(see fig. 20)
Do not use more than one filter at a
time.
^ Open the dust compartment lid.
a Open the filter frame until it clicks,
grasp the clean corner (see arrow)
and remove the used filter.
b Insert the new filter.
^ Close the filter frame.
^ Close the dust compartment lid.

Exchanging exhaust filters

Depending on the model, there may
also be a HEPA AirClean 30 exhaust
filter included which can be used
instead of the standard AirClean
exhaust filter.
In order to use the HEPA AirClean 30
filter the AirClean filter and filter frame
must be removed. The exhaust filter
change indicator ~ must also be
activated (see fig. 21).
After about 10-15 seconds, a small red
marker will appear in the left-hand side
of the display (see fig. 22).
When to change the HEPA AirClean
30 exhaust filter (see fig. 23)
If the display of the exhaust filter
change indicator has turned fully red.
The indicator light will come on after
approx. 50 hours of operation, which is
equivalent to one year of average use.
The vacuum cleaner can still be used
however, the filter performance and
suction power will be reduced.
Replacing the HEPA AirClean 30
exhaust filter (see fig. 24)
a Remove the used exhaust filter.
b Insert a new filter.
^ Activate the exhaust filter change
indicator (see fig. 19).
When to change the thread catcher
on the standard floor brush
(depending on model)
The thread catcher on the floor brush
should be replaced as soon as they
appear worn.
Changing the thread catcher on the
standard floor brush (see fig. 25)
(depending on model)
^ Using a screwdriver or similar object
to remove the thread catchers from
the slots.
^ Insert the new thread catchers.
New thread catcher pads can be
purchased from any authorized Miele
vacuum dealer or Miele.

Cleaning and care

,
Turn off the vacuum and unplug
it from the outlet before performing
any maintenance work.
Vacuum cleaner and accessories
The vacuum cleaner and other plastic
accessories can be cleaned with a damp
cloth or a cleaner suitable for plastics.
en
15

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Classic c1 hs12

Table des Matières