Commands And Functions - dB Technologies LVX 10 Mode D'emploi

ENGLISH
LVX 12
The LVX 12 bi-amped active speaker is equipped with a DIGIPRO
amplifier delivering 800W (Power PRG).
LVX 12 active two-way speaker features woofer 12" (voice coil 1")
and compression driver 1" (voice coil 1,5") on a 90°x40° horn.
The speakers' horizontal directivity is 90° by default factory setting.
The speaker is made of 15mm birch plywood, the three plastic
handles and the 12 M10 threads located on the sides and the back
of the speaker are enabling easy transport and installation.
The speaker has been designed to be used also as stage monitor
(45° angle), by rotating the horn you can maintain the same audio
coverage angle of high frequencies also when the speaker is used
as monitor.
In the bottom of the box there is a standard pole mount cup
(D36mm).
2.

COMMANDS AND FUNCTIONS

1) "Balanced Input" - "Link" - "Input Link" CONNECTORS
These balanced inputs can be used to connect balanced or unbalanced microphones or audio
sources at line level (0dB) (eg. preamplifier, mixer, ...)
The balanced connector is connected in parallel and can be used to send the audio signal to
other amplified speakers, recorders or supplementary amplifiers.
2) "Ready" INDICATOR LIGHT
This indicator shows green to indicate that the main power voltage is correct.
The LED shows green normal operating conditions.
3) "Signal" INDICATOR LIGHT
This indicator shows green to indicate the presence of the audio signal (at a level of -20dB).
9
LVX 15
LVX 15 bi-amped active speaker is equipped with a
®
DIGIPRO amplifier delivering 800W (Power PRG).
LVX15 active two-way speaker features a woofer 15" (voice
coil 2") and a compression driver 1" (voice coil 1,5") on a
90°x40° horn.
The speakers' horizontal directivity is 90° by default factory
setting.
The speaker is made of 15mm birch plywood, the three
plastic handles and the 12 M10 threads located on the
sides and the back of the speaker are enabling easy
transport and installation.
The speaker has been designed to be used also as stage
monitor (45° angle), by rotating the horn you can maintain
the same audio coverage angle of high frequencies also
when the speaker is used as monitor.
In the bottom of the box there is a standard pole mount cup
(D36mm).
LVX Professional Active Speaker
®