Accu-Chek Compact Plus Manuel De L'utilisateur page 40

with their memory location number (see Chapter 5.2). Without the
time and date the meter is not able to calculate averages, nor the
lowest and the highest values (see Chapter 5.3). Results sent to a
PC, for instance, without the time and date (see Chapter 5.4)
cannot be statistically analyzed or, if they can, then only to a
limited extent.
If the year, date and time settings are lost as a result of a battery
i
replacement, the meter displays the following settings:
Year: year of manufacture 20XX, e.g. 2007
Time: 0:00 or 12:00 am, depending on the time-and-date
format you selected previously
Date: 1-01 as day-month (D-MM) or month-day (M-DD),
depending on the time-and-date format you selected
previously
In the sections set out below you will find
a description of the general rules for changing settings,
descriptions of individual settings and how to change them.
40
Settings