Leg Rests - Zippie Salsa M2 Mini Manuel D'utilisation

Masquer les pouces Voir aussi pour Salsa M2 Mini:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5.8.5 Arm Rest Replacement
To Remove The Armrest:
• Use a 6.0 mm Allen Key, (Hexagon Wrench), to undo
the rotation screw, (A).
• Remove the screw.
• Pull the Armrest assembly away from the bracket,
(Fig.5.25).
• To refit, reverse the above procedure.
• Tighten screw to 20 Nm.
Fig. 5.25
Rev.C

5.9 Leg Rests

WARNING!
Be aware of your environment to make sure you do
not injure your legs when Leg Rests are extended.
Always ensure that the Leg Rests or foot plates do
not come into contact with the castors before driving
the wheelchair .
Leg Rests are not to be used for lifting or carrying
the wheelchair under any circumstances.
As with all moving parts be careful not to trap your
fingers.
5.9.1 Swing-away leg rest removal
To swing away the leg rest:
Depress the retaining catch and swing the leg rest
out, (Fig.5.26).
Lift the leg rest up and off if removal is required,
(Fig.5.27).
To refit:
Line up the holes and studs, (Fig.5.28).
Drop the leg rest into the receiver.
Push the leg rest inwards until it clicks shut,
(Fig.5.29).
Fig.5.26
A
Fig.5.28
Fig.5.27
Fig.5.29
27
ZIPPIE SALSA M
Mini
2

Publicité

Table des Matières
loading

Table des Matières