Listening To The Sound; Listening To The Tv; Listening To The Connected Av Device - Sony HT-ST5000 Manuel D'instructions

Listening to the Sound

Listening to the TV

1
Press HOME.
The home menu appears on the TV
screen.
2
Select [TV] on the home menu.
3
Select the program using the TV's
remote control.
The selected TV program appears
on the TV screen and the TV sound
is output from the system.
4
Adjust the volume.
• Adjust the volume by pressing 
+/– on the remote control.
• Adjust the subwoofer volume by
pressing SW  +/– on the remote
control (page 32).
Note
Set the speakers setting of the TV (BRAVIA)
to Audio System. Refer to the operating
instructions of your TV regarding how to
set the TV.
Tip
You can select [TV] by pressing INPUT +/–
on the remote control.
Listening to the
Connected AV Device
1
Press HOME.
The home menu appears on the TV
screen.
2
Select the input that the desired
device is connected on the home
menu.
The image of the selected device
appears on the TV screen and the
sound is output from the system.
If you select [Analog], the [Analog]
screen is displayed on the TV
screen.
3
Adjust the volume.
• Adjust the volume by pressing 
+/– on the remote control.
• Adjust the subwoofer volume by
pressing SW  +/– on the remote
control (page 32).
Tip
You can select the input by pressing INPUT
+/– on the remote control.
Changing the Input Name
Displayed on the Home
Menu
You can change the input name of
[HDMI1], [HDMI2], or [HDMI3] that is
displayed on the home menu.
1
Press HOME.
The home menu appears on the TV
screen.
2
Put the cursor on [HDMI1],
[HDMI2], or [HDMI3] on the home
menu, then press OPTIONS.
The options menu appears on the
TV screen.
3
Select [Input Label Setting].
27
US