Kettler SATURA M Mode D'emploi Et Instructions D'entraînement page 20

Masquer les pouces Voir aussi pour SATURA M:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
Training and Operating Instructions
period.
Empirical Formula:
Either
10 min
/
training unit in daily training
or approx. 30 min
/
training unit with 2–3x / week
or approx. 60 min
/
training unit with 1–2x / week
Beginners should not begin with training units of 30-60 minutes.
The beginner's training can be planned as follows in the first 4
weeks:
Training frequency
Extent of training session
1st week
3 times a week
2 minutes of training
Break of 1 minute for physical exercises
2 minutes of training
Break of 1 minute for physical exercises
2 minutes of training
2nd week
3 times a week
3 minutes of training
Break of 1 minute for physical exercises
3 minutes of training
Break of 1 minute for physical exercises
2 minutes of training
3rd week
3 times a week
4 minutes of training
Break of 1 minute for physical exercises
4 minutes of training
Break of 1 minute for physical exercises
3 minutes of training
4th week
3 times a week
5 minutes of training
Break of 1 minute for physical exercises
4 minutes of training
Break of 1 minute for physical exercises
4 minutes of training
It is recommended that you perform approx. 5 minutes of exer-
cises before and after every training unit, in order to warm up
and cool down. There should be a training-free day between
each two consecutive training units, if you prefer training sessi-
ons of 20-30 minutes 3 times a week later on in your training.
Otherwise, there is no reason why you should not train daily.
20
GB
Glossary
Age
Input for the calculation of the maximum pulse.
Dimension
Units for the display of km/h or mph, KJoule or kcal.
Fat burning pulse
Calculated value of: 65% maximum pulse.
Fitness pulse
Calculated value of: 75% maximum pulse.
Glossary
An accumulation of attempts at explanation.
HI symbol
If "HI" is displayed, the target pulse is too high by 11 beats. If
"HI" blinks, the maximum pulse is exceeded. "HI" monitoring is
always activated.
LO symbol
If "LO" is displayed, the target pulse is too low by 11 beats.
"LO" monitoring is activated, if the target pulse is reached
during training.
Maximum pulse(s)
Value calculated from 220 minus age.
Menu
Display, in which values can be entered or selected.
Pulse
Registration of the heart beat per minute.
Recovery
Recovery pulse measurement at the end of training. The differen-
ce between start pulse and end pulse of a minute is calculated.
With the help of this difference, a fitness mark is determined. If
you train regularly, the improvement of this mark is an indicati-
on for your fitness progression.
Reset
Deletes the display contents and resets the display.
Target pulse
Input of a particular pulse value, which is be monitored.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Satura m ext

Table des Matières