Technical Data; Drill Motor; Drill Stand - Husqvarna DMS 240 Manuel D'utilisation

Drill motor

Electric motor
Rated voltage, V
Rated output, W
Rated current, A
230 V
100-120 V
Weight, kg/lbs
Spindle speed, idle, rpm
Position 1
Position 2
Drill bit
Max. drill diameter, mm/inches
Spindle thread, inner
Spindle thread, outer
Water connector
Noise emissions (see note 1)
Sound power level, measured dB (A)
Sound power level, guaranteed L
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A)
Vibration levels (see note 3)
2
Handle, m/s
Note 1: Noise emissions in the environment measured as sound power (L
Note 2: Noise pressure level according to EN 12348. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.0 dB(A).
Note 3: Vibration level according to EN 12348. Reported data for vibration level has a typical statistical dispersion (standard
2
deviation) of 1 m/s .

Drill stand

Height, mm/inches
Width, mm/inches
Depth, mm/inches
Weight, kg/lbs
Travel length, mm/inch
The column's angling

TECHNICAL DATA

dB (A)
WA
Single-phase
230/100-120
2400
10A
20A
5,9/13
390
890
250/10
G 1/2" outer 5/8" 11 UNC
1 1/4" 7 UNC
G 1/4"
106
107
90
<2,5
) conforming to EN 12348.
WA
1052/41,4
266/10,5
545/21,5
14,5/32
686/27
0-60°
– 17
English