Presentation; Drill Motor And Stand; Stand; Drill Motor - Husqvarna DMS 240 Manuel D'utilisation

Drill motor and stand

It is our wish that you will be satisfied with your product and
that it will be your companion for a long time. Think of this
operator's manual as a valuable document. By following its
content (usage, service, maintenance, etc), the life span and
the second-hand value of the machine can be extended. If
you sell this machine, make sure that the operator's manual
is passed on to the buyer.
A purchase of one of our products gives you access to
professional help with repairs and services. If the retailer who
sells your machine is not one of our authorised dealers, ask
him for the address of your nearest service workshop.
Husqvarna Construction Products has a policy of continuous
product development. Husqvarna reserves the right to modify
the design and appearance of products without prior notice
and without further obligation introduce design modifications.
10 –
English

PRESENTATION

Stand

• The stand is for drilling in ceilings, walls and floors.
• The drill stand is equipped with a quick connection plate
for the drillmotor.
• The base plate is made of aluminium and is therefore very
light weight. It has a integrated vacuum plate.
• The wheel kit is removable.
• The column can be tilted 0-60°.
• The feeder housing's transmission is adjustable. The
higher gives 2.5:1 and the lower, 1:1.
• Feed lever can be used to adjust base plate leveling
screws and set desired column tilt.

Drill motor

• DMS 240 is an electric drill, intended for drilling concrete,
brick and various stone materials.
• The drilling machine has a modular design and is easy to
assemble.
• The machine is intended for stand mounted drilling.
• The machine is equipped with two gears.
• The machine is double insulated.
• The overload protection disconnects the power, if the
machine is subjected to heavy loads or if the drill bit jams.
• The machine is water cooled.