Installation Clearances; Optional Accessories - GE JV936 Mode D'emploi

INSTALLATION CLEARANCES

These vent hoods are designed to be installed onto
a wall. They may be installed beneath a soffit or
cabinet.
• Install these hoods 24" Min. to 36" Max. above the
cooking space.
SOFFIT INSTALLATION
SOFFIT
24" MIN.
36" MAX.
In this installation, the ductwork running from the
top of the hood will be concealed in the soffit or
upper cabinetry.
WALL MOUNT INSTALLATION
24" MIN.
36" MAX.
For this isntallation, a decorative duct cover is
available to conceal the ductwork running from
the top of the hood. Use of the duct cover requires
special consideration to the installation height above
the countertop. See page 12 for details.
Installation Instructions
7

OPTIONAL ACCESSORIES

Duct Cover
A decorative duct cover is available to
accommodate 8 to 10 ft. ceiling heights. The duct
cover will expand from 12" Min. or 24" to 36" Max.
height.
• The duct cover conceals the ductwork running
from the top of the hood to the ceiling.
• The duct cover accessory fits both 30" and 36"
wide models. Order the duct cover accessory at
the same time as the vent hood. All accessories
should be on site at the time of hood
installation.
Order JXCHSS
2 Wood 2
Screws Washers
2 Phillips Head
Decorative Scews
Ceiling
Bracket
2 Wall
Fasteners 2-Piece Duct
Cover with
Ceiling Bracket
4 Phillips
Head Screws