Watts e-ULTRAMIX 3/4 Manuel D'installation page 50

6 - Cartridge Alarm:
This function generates an alert message on a predefined date to indicate that the
e-Cartridge requires maintenance. Select Cartridge alert. By default, the cycle is set to a
period of 18 months (i.e. 539 days). If you do not wish to receive cartridge maintenance
alerts, press the
using .
Parameters
1 Date/Hour
2 Contrast
3 Languages
4 Units
5 SD export
6 Cartridge Alarm
Parameters
The maintenance reminder can be set to between 6 and 36 months' duration. The
Cartridge Alarm
1 Date/Hour
2 Contrast
display shows the number of days remaining until maintenance is next due. Whenever
Status :On
3 Languages
4 Units
the e-Cartridge is replaced, we recommended resetting the alert to ensure it is triggered
Cycle : 6Months
5 SD export
Remaining 6 Cartridge Alarm : 180Days
at the correct time. Press the
Reset
Cartridge Alarm
Cartridge Alarm
Status :On
Status :On
Cycle :
Remaining : 180Days
Cycle : 18Months
Remaining : 539Days
Reset
Reset
Cartridge Alarm
Status :On
Cycle : 18Months
Remaining : 537Days
Reset :Yes
7 - Installer menu:
• Calibration
The mixed water probe is calibrated in the factory, but it may require recalibration if
used in a multi-probe system. Once all connections are complete and the system has
been supplied with water, select Calibration in the Configuration menu.
Installer Menu
1 Calibration
2 Relay Test
3 Thermal shock T°
4 T° Limitation
5 Modbus
6 Overtemp Alarm
Run the water at the usual temperature and calibrate the mixed water temperature probe
Installer Menu
directly on the control unit with reference to the value measured using the reference
1 Calibration
2 Relay Test
thermometer.
3 Thermal shock T°
4 T° Limitation
5 Modbus
6 Overtemp Alarm
22
key (the cursor reading "On" switches to "Off"), and confirm
Cartridge Alarm
Status
Cycle
Remaining
Reset
Cartridge Alarm
Cartridge Alarm
Status
Status
Cycle
Cycle
Remaining
Remaining
key, then
Reset
Reset
Cartridge Alarm
Cartridge Alarm
Status
Status
6Months Cycle
Remaining
Reset
No
Calibration
Probes
- Mixed water 38.7°C
- Loopback
- DHW
Flushing relay
Alarm relay
Storage Relay
Pump relay
:On
: 18Months
: 539Days
:On
:On
: 18Months
: 18Months
: 539Days
: 537Days
to select "Yes" and validate using
:Yes No
:On
:Off
: 18Months
: 537Days
:Yes No
Examples of assembly
37.0°C
65.3°C
Relay Test
ENGLISH
EN
Cartridge Alarm
Status :Off
Cartridge Alarm
Status :Off
Mixed T° setting
50.0
°C
Mixed water 48.8°C
Relay Test
Flushing relay
Alarm relay
Storage Relay
Pump relay
.