System Presentation; Description; Safety Instructions - Watts e-ULTRAMIX 3/4 Manuel D'installation

ENGLISH

Description

e-ULTRAMIX is a next-generation system designed to electronically set the
®
temperature of mixed water in collective facilities, either locally or remotely.
This electronic system is fitted with a smart control unit used to program preventive heat
treatment cycles automatically, safely and securely, to prevent any risk of legionella in
the DHW system. It is equipped with 3 probes for recording the temperatures conforming
to the (French) decree of 1 February 2010.
The control unit stores all settings relating to the preventive heat treatment process, as
well as the various alerts and alarms, to ensure effective monitoring of system hygiene.
System data history can be retrieved, either from the data stored on a microSD card,
or remotely by a Building Management System (Modbus protocol) via the dedicated
RS485 interface.
e-ULTRAMIX is also the only scalable system on the market. It can be used on a new
®
system or an existing system already fitted with an e-ULTRAMIX
simple addition of an e-Kit.

Safety instructions

• B efore installing, commissioning or performing maintenance on the e-ULTRAMIX
system, please ensure you have read and understood the detailed instructions in this
booklet.
This symbol attracts the reader's attention and highlights critically important
instructions that must be followed WITHOUT FAIL to avoid damage to the system.
• T he e-ULTRAMIX
accordance with legal requirements, health regulations and all applicable laws.
• Ensure that all connections in your system are watertight.
Always make sure the electricity supply is disconnected before any installation or
maintenance work!
Any installation or electrical connection to the e-ULTRAMIX
carried out safely. The e-ULTRAMIX
personnel. Please respect all applicable safety regulations, in particular the VDE
0100 / NF C15-100 standards (≤ 1000 VAC). If the power cable is damaged, it must
be replaced by a qualified person.
Make sure your e-ULTRAMIX
temperature limit) according to the technical specifications of your system.
The e-ULTRAMIX
sensory or mental capabilities, or lack of experience and knowledge.
Important note
The hot water temperature should not exceed 85 °C, as this will cause premature ageing
of the device and system.
EN
I - SYSTEM PRESENTATION
system must be installed and configured by a professional in
®
®
must not be used or operated by persons with reduced physical,
®
must be connected and operated by qualified
®
system is configured correctly (especially the
mixing valve with the
®
control unit must be
®
®
3