Specifications - Sony WRR-855S Mode D'emploi

Specifications

Tuner section
Type of reception
Space diversity
Circuit system
Dual conversion superheterodyne
Receiving frequencies
Model available in USA: one
frequency within a 24-MHz
frequency band selected from
566 to 806 MHz
Model available in Europe: one
frequency within a 24-MHz
frequency band selected from
606 to 862 MHz
Model available in Australia: one
frequency within a 25-MHz
frequency band selected from
792.250 to 805.500 MHz
Local oscillators
1st: Crystal controlled PLL
synthesizer
2nd: Crystal controlled PLL
synthesizer
Antenna connectors
BNC-R type (2), 50 ohms
Selectivity
60 dB or more (at ±250 kHz
detuned)
Spurious rejection ratio
70 dB or more
Image rejection ratio
60 dB or more
RF squelch level
10 dBµ/OFF
0 dBµ = 1 µV
EMF
De-emphasis
50 µs
Frequency response
50 to 15,000 Hz ±3.0 dB
Signal-to-noise ratio (±5.0 kHz deviation at
1 kHz modulation)
30 dB or more at RF input level
10 dBµ (A-weighted)
60 dB or more at RF input level
60 dBµ (A-weighted)
Distortion
1.0% or less (±40 kHz deviation at
1 kHz modulation)
Tone squelch frequency
32.768 kHz
Output level
–40 dBu (±5.0 kHz deviation at 1
kHz modulation)
0 dBu = 0.775 Vrms
Output impedance
100 ohms, unbalanced
Output connector
15-pin D-sub connector (1)
General
Power requirements
DC 7 V (supplied from the BTA-
801)
Operating voltage
DC 6.5 to 9.0 V
Current consumption
200 mA DC or less (at DC 7 V)
Operating temperature
0°C to +50°C (32°F to 122°F)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Dimensions
88 × 118.8 × 31.3 mm (w/h/d) (3
3 1
× 4 / × 1
4
Mass Approx. 280 g (9.9 oz) with the
supplied antennas attached
Supplied accessories
Antennas (2)
Operating instructions (1)
Wireless Microphone System Frequency
List (1)
Optional accessory
BTA-801 Portable Tuner Mount Adapter
1
/
2
/ inches)
4
Specifications 17