Display Messages - Sony WRR-855S Mode D'emploi

Display Messages

In addition to the normal indications, the following messages may appear in the LCD panel.
Message Meaning
Err 01 An error occurred in backup memory
data.
Err 02 An error occurred in the PLL
synthesized circuit.
Err 03 The operating voltage exceeds the
allowable value.
NOTONE The audio output is turned off because
no tone signal is available or a tone
signal other than 32.768 kHz is being
received.
1) The tuner unit is set in T OFF mode.
T OFF
1) When the tuner unit is turned on, this message appears after the version number of your tuner unit.
Subsequently, the tuner unit goes to the normal display status.
Measures
Contact your Sony dealer.
Set the tuner unit to the T OFF
mode (see page 13) to output
the audio signal.
For details, see "Selecting and
Cancelling the T (Tone Squelch)
OFF Mode" on page 13.
Display Messages 15