Laserworld RTI FEMTO Série Mode D'emploi page 8

Manual: RTI FEMTO Series
Important Note:
Operate scanners/galvos only at appropriate speed according to the res-
pective scan angle. Too high scan speed will damage the scanning system.
8. Settings at the remote control pad
Color Settings:
Scanner Settings:
Threshold Settings:
page 8 / 31
Use the sliders to change the color intensity
Size X : use these buttons to change the horizontal
size of the output
Offs X : use these buttons to change the horizontal
shift of the output (left / right)
Size Y : use these buttons to change the vertical
size of the output
Offs Y : use these buttons to change the vertical
shift of the output (up / down)
Use the sliders to change the threshold level of
each color