BFT B LTA R1 Mode D'emploi page 3

Masquer les pouces Voir aussi pour B LTA R1:
Table des Matières

Publicité

The blinker can only be used with the control units supplied by the
manufacturer.
2) MAINTENANCE
DANGER! Before any maintenance or repair operation, disconnect the
automation system from the power supply.
WARNING! Maintenance to the system is to be carried out regularly by
qualified personnel.
Periodically clean the blinker hood.
Do not allow children to play or stand within range of the automated
system.
Children should be supervised to ensure they do not play with the
appliance.
If the power cord is damaged, it must be replaced by the manufacturer
or its service agent or a similarly qualified person to avoid a hazard.
This automated system is not meant for use by children or by people
with impaired mental, physical or sensory capacities, or people who do
not have suitable knowledge.
3) BULB REPLACEMENT (Fig.A)
SCRAPPING
Materials must be disposed of in accordance with the regulations
in force. Do not throw away your discarded equipment or used
batteries with household waste. You are responsible for taking
all your waste electrical and electronic equipment to a suitable
recycling centre.
1) GENERALITES
Clignotant de sécurité visuelle pour signaler le mouvement d'un portail
ou d'une porte motorisée.
Le feu clignotant ne doit être utilisé qu'avec les unités de commande
duconstructeur.
2) ENTRETIEN
DANGER! Couper l'alimentation de la motorisation en cas d'interventions
d'entretien ou de réparation.
50/60 Hz
120 V
40 W - E 14
220 V
230 V
24 V
25 W - E 14
MANUEL D'UTILISATION (F)
1
ON
ON
OFF
Fig.A
2
3
4
3
B LTA R1 - B LTA R2 -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

B lta r2

Table des Matières