Zodiac BARACUDA ZIPPY Guide Du Propriétaire page 6

In proper order, connect the number of 5 ft. hose sections needed for your pool to the Star Control
Assembly. Hose and hose floats must be assembled as shown below for Zippy to perform properly.
Wall Adapter
Second hose section
from the cleaner head
receives no hose
floats
Thread the head connector that is attached to the first hose section onto the cleaner head. Submerge
the Zippy head in the pool, tilt it on its side and wiggle it back and forth until the air is evacuated and
bubbles cease. Then, lower the Zippy to the bottom of the pool.
6
2' Hose Section
Star Control®
Hose Float
First hose section from the cleaner head
receives 2 hose floats
Hose Float
Hose Float
Head
Connector