Maintenance And Care - ergoline MULTIVISION Instructions De Service

Please read and observe ...

Maintenance and care

Extreme danger! High voltage!
DANGER!
During maintenance work there is a danger of touching
live parts and receiving a fatal electrical shock.
• Disconnect device from power supply before
opening – also see Page 29.
• Do not reach behind covers, do not open the device
and do not replace lamps with the device switched
on.
Maintenance and care play a major role in deciding whether the device
meets the requirements placed on it in a satisfactory manner. The com-
pliance with the specified maintenance intervals and the careful conduct-
ing of the maintenance and care work are therefore absolutely necessary
– see Page 32 ff.
The current operating hours of the parts requiring maintenance can be
displayed in the Presetting mode – See the operating instructions for the
tanning system.
Remount any protective devices (e.g. filter panels) after completing work.
CAUTION!
Only use original spare parts of the same type or compatible
parts! The use of other parts voids the conformity! Any liability
is excluded in case of damage or injury proven to be the re-
sult of the use of non-original spare parts.
14