Product Description - Ayce KIUTOO Manuel D'utilisation

PRODUCT DESCRIPTION

1
2 3
7
Front grid with rotation
1.
function
2. Stepping motor
3. Housing
Fan motor
4.
5.
Blades
OPERATION
Remote control
Product can be controlled by remote control or by control panel on the appliance.
Every function will be indicated by a light on the control panel on the appliance.
4 5 6
8
9
6. Rear protective grid
7. Remote control
8. Power plug and cord
9. Control panel
Control panel
If the appliance is plugged in, you can use this switch
to turn the appliance on or off. Press this button once
and the appliance will begin operating at the lowest
speed. Press it again to switch the appliance off. The
function lights by this button and the low speed will
illuminate.
Button for low ventilation speed.
Button for medium ventilation speed.
Button for high ventilation speed.
Rotation button for front grid.
With this button, you can activate the rotation of the
front grid. Letting the front grid rotate continually will
blow the air evenly and circularly into the room.
Otherwise, you can stop the front grid at a certain
position by pressing this button.
Rotation stop for front grid.
With this button, you can stop the rotation of the front
grid. Depending on the position and angle of the fins,
the air will be constantly blown in the corresponding
direction.
Note: The remote control must be installed in 1 battery CR2025/3V(include)
to work.
36 | 37 G