Using The Headset; Installing The Usb Wireless Receiver - Medion MD 43279 Notice D'utilisation

The operating LED flashes red slowly if the
battery charge level is too low and the battery
needs to be charged.
 Remove the USB cable and close the micro USB
compartment as soon as the battery is fully
charged.

7. Using the headset

7.1. Installing the USB wireless
receiver
Use the supplied USB wireless receiver if the
PC you want to work with has no built-in wire-
less receiver.
 Switch on the computer and all connected periph-
eral devices (monitor, printer etc.) and wait until
the operating system is fully started.
 Plug the USB wireless receiver into a free USB port
on your computer.
 All necessary drivers are installed automatically.
46