10�1�1 Switch Between The Menus; 10�1�2 Change To The Process Value Display (Run Mode); 10�1�3 Locking / Unlocking - Autosen AS005 Notice D'utilisation

10.1.1 Switch between the menus
1� Change from the RUN mode to the main menu
2� Select the parameter EF
3� Change to sub-menu EF
4� Select the parameters CFG, MEM, DIS
5� Change to the sub-menus CFG, MEM, DIS
6� Return to the next higher menu level
10.1.2 Change to the process value display (RUN mode)
There are 3 possibilities:
I� Wait for 30 seconds (→ 10.1.4 Timeout).
II� Press [▲] until the RUN mode is reached.
III� Press [▲] + [▼] simultaneously until the RUN mode is reached.
10.1.3 Locking / Unlocking
The unit can be locked electronically to prevent unintentional settings�
On delivery: not locked�
Locking ► Make sure that the unit is in the normal operating mode�
► Press [▲] and [▼] simultaneously for 10 s until [Loc] is displayed.
Unlocking ► Make sure that the unit is in the normal operating mode�
► Press [▲] and [▼] simultaneously for 10 s until [uLoc] is displayed.
10.1.4 Timeout
If no button is pressed for 30 s during parameter setting, the unit returns to the
operating mode with unchanged values�
[●]
[▼]
[●]
[▼]
[●]
Press [▲] + [▼] simultaneously
UK
69