Makita DBM230 Notice Originale page 19

Equipment characteristics:
Wet Diamond Core Drill DBM 230
Rated Voltage:
Rated Power Input:
Rated Current:
Frequency::
max. Drilling Diameter:
Holding fixture:
Insulation Class:
IP Rating:
Weight according to EPTA Procedure 01/2003:
Interference Suppression:
Gear
Prescribed use
The Wet Diamond Core Drill DBM 230 shall only be operated by trained
personnel!
The DBM 230 in connection with wet core drill bits is designed for drilling in
concrete, stone and masonry for wet cutting only.
The tool may only be used in conjunction with a suitable diamond drilling
stand (P-54190).
Safety precautions
Important directions and safety precautions are represented by symbols on the
tool.
Read these instructions carefully and completely and adhere
to them strictly in order to ensure safe working conditions.
In addition, the general safety regulations in the annexed
brochure must be observed. Before using the tool for the
first time, ask for a practical demonstration.
No-Load
Speed
-1
390 min
-1
1040 min
-1
1700 min
40-60 Hz
230 mm
1¼" UNC
I
IP 20
11,3 kg
EN 55014 und EN 61000
max.
Load Speed
Drilling Diameter
-1
270 min
-1
700 min
-1
1250 min
230 V ~
2500 W
13,5 A
230 mm
100 mm
60 mm