Using The Device - Beurer FC 76 Mode D'emploi

Note
The device can also be used twice a week for non-sensitive problem skin (with a break
of at least 48 hours between use).

6.2 Using the device

1. Connect the mains adapter to the
device and plug the adapter into the
socket.
2. Insert a single-use filter into the head
of the device.
3. Place the attachment you wish to use
on the tip of the hand-held device.
4. To switch on the device, move the
ON/OFF switch to the desired inten-
sity level.
5. Place the hand-held device on your
face and move it over the skin. Make
sure that you do not move the hand-
held device over one part of the face
more than once. Further details on
treatment can be found in Section "6.3
Application areas".
17