Initial Use; Use; Using The Facial Sauna - Beurer FS 60 Mode D'emploi

5. INITIAL USE

Uncoil the cable fully. Place the device on a flat, firm, level and water-insensitive surface or
on a table.
Use the measuring cup to fill the device's water container with water. Do not exceed the
filling level.
maximum
You should never fill the container directly under running water but only use the measuring
cup that comes with it. The water volume at maximum filling level is enough for about 20
minutes use.
Do not use oils, herbs or other aromatic substances as a substitute for water but only added
to adequate water filling.
As well as the facial mask, there is also a special attachment for the nose.
Fix the desired steam mask onto the basic unit by turning it.
Ensure that the mask engages firmly with the knobs.

6. USE

This device is intended only for use on the human face.
Using the facial sauna provides an ideal basis for cosmetic facial care. The skin of your face
is prepared optimally for further treatments such as deep cleansing, moisturising, face masks etc.
Beauty salons very often begin facial treatments with a steam treatment. The invigorating
steam increases the skin circulation, the pores are opened and impurities are removed more
easily.
You can thus provide the perfect basis for every kind of facial care. The skincare products
penetrate deep into the skin through the opened pores, thus optimising their action.

6.1 Using the facial sauna

Plug into the socket. Then turn the control clockwise until the blue check lamp lights up. Turn
the switch first to position "2" in order to speed up heating. After about 3 minutes, steam
begins to rise. Turn the switch back to position "1" to reduce the steam output.
Adjustable steam outlet:
You can also regulate the strength of the steam outlet by turning the steam disc.
When the steam outlet is closed, the steam comes out of the steam valve which is located on
the back of the device or mask. The water heating phase can also be shortened by closing
the steam disc.
To avoid burns, never touch the steam outlet directly and ensure that the steam can come
out of the valve freely.
Now sit down in front of the device. Bend forward until your face is above the mask.
Warning
Do not hold the device in your hand and do not adjust it during operation until it has cooled
down. You could sustain burn injuries from hot water.
If the steam effect is perceived as too hot, increase the distance to avoid burns.
15