Velleman HAM201 Mode D'emploi page 7

 All modifications of the device are forbidden for safety reasons.
Damage caused by user modifications to the device is not covered
by the warranty.
 Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
 Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
 There are no user-serviceable parts inside the device except for
the batteries. Refer to an authorized dealer for service and/or
spare parts.
 Do not use this product to violate privacy laws or perform illegal
activities. Respect the legislation in your region when installing an
alarm system. If necessary, refer to local authorities.
4. Features
This basic home alarm system has an integrated PIR sensor. The PIR
sensor detects if an intruder enters the room. An infrared remote
allows you to arm and disarm the alarm system. A solar panel
provides power during standby. The battery power is only used
during an alarm trigger.
 alarm trigger: motion detection via PIR sensor
 remote control to arm and disarm the alarm system
 solar panel to extend battery lifetime
 130 dB alarm sound
 quick and easy installation.
5. Overview
Refer to the illustrations on page 2 of this manual.
alarm system
1 solar panel
2 indicator LED
3 motion detector
remote control
6 IR LED
7 indicator LED
V. 03 – 11/12/2014
HAM201
4 battery compartment
5 siren
8 arm button (ARM)
9 disarm button (CLR)
7 ©Velleman nv