Water Level; Re Ll The Water - Philips HU4902 Mode D'emploi

Water level

When there is not enough water in the
water tank,
• the oat sinks.
• the red indicator light starts
blinking.
• the humidi er continues to work for
one more hour.
You have to re ll the water into the water
tank.
Note
•
The humidi er stops humidifying if you do not
re ll the water after more than one hour. The
red indicator light is on.
•
It is normal to nd some water left in the tank.

Re ll the water

There are three ways to re ll the water
into the water tank: Normal re ll, re ll
without removing the water tank and
easy re ll.
Normal re ll
1
Remove upper cover by lifting it at
both sides.
2
Remove the water tank from the
humidi er base by lifting it at both
sides.
EN 13