Manufacturer's Warranty; Further Information; Mode D'emploi Original; Indications Relatives À La Documentation - Hilti HDE 500 ­A12 Mode D'emploi Original

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Trouble or fault
The foil pack holder does not
engage with an audible click
No mortar is dispensed from
the mixing nozzle
10
Disposal
WARNING
Risk of injury due to incorrect disposal! Health hazards due to escaping gases or liquids.
▶ DO NOT send batteries through the mail!
▶ Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.
▶ Dispose of your battery out of the reach of children.
▶ Dispose of the battery at your Hilti Store, or consult your local governmental garbage disposal or public
health and safety resources for disposal instructions.
Most of the materials from which Hilti products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to Hilti for recycling. Ask Hilti Service or your Hilti sales representative for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household waste!
11

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
12

Further information

For more information on operation,
qr.hilti.com/manual/?id=2330325
This link is also to be found at the end of the documentation, in the form of a QR code.

Mode d'emploi original

1
Indications relatives à la documentation
1.1
À propos de cette documentation
Lire intégralement la présente documentation avant la mise en service. C'est la condition préalablement
requise pour assurer la sécurité du travail et un maniement sans perturbations.
Bien respecter les consignes de sécurité et les avertissements de la présente documentation ainsi que
celles figurant sur le produit.
Toujours conserver le mode d'emploi à proximité du produit et uniquement le transmettre à des tiers
avec ce mode d'emploi.
1.2
Explication des symboles
1.2.1
Avertissements
Les avertissements attirent l'attention sur des dangers liés à l'utilisation du produit.
signalisation suivants sont utilisés :
*2330325*
Possible cause
The retaining lugs are dirty
The retaining lugs are defective
Mortar in the mixing nozzle has
hardened
technology,
2330325
Action to be taken
▶ Clean the retaining lugs.
▶ Insert a different foil pack
holder. Contact Hilti Service if
the problem persists.
▶ Unscrew the mixing nozzle
containing the hardened mortar
and fit a new mixing nozzle.
environment and recycling,
follow this link:
Les termes de
Français
11

Publicité

Table des Matières
loading

Table des Matières