Operation Details - Panasonic CZ-RD52CU Mode D'emploi

OPERATION DETAILS

The timer setting will shown at wired remote
control only but not at indoor unit's TIMER
indicator.
Check Current Timer Programme
Perform the step below to check the timer
programme for a particular day.
1. Press TIMER to enter timer mode.
2. Press to enter day setting.
3. Press TIMER or
shown, press to confi rm your selection.
4. Press TIMER or
programmes.
Modify Current Timer Programme or Add
New Timer Programme
1. Press TIMER to enter timer mode.
2. Press to enter day setting.
3. Press TIMER or
shown.
4. Perform steps 4 to 7 of "WEEKLY TIMER
SETTING" to modify existing timer programme,
or add any timer programme.
Cancel Current Timer Programme
Perform the step below to cancel the timer
programme for a particular day.
1. Press to enter day.
2. Press TIMER or
shown.
3. Press to enter programme setting.
4. Press TIMER or
programme is shown.
Press to cancel the programme and
will disappear.
Disable & Enable Weekly Timer
• To disable weekly timer setting, press TIMER
, then press
• To enable previous weekly timer setting, press
TIMER , then press
until your desired day is
to check the set
until your desired day is
until your desired day is
until your desired
.
.
NOTE
• POWERFUL, QUIET operation setting could be
operate according to wireless remote control.
• When wired remote control is in operation, the
timer setting from wireless remote control will be
cancelled.
5