To Set The Timer - Panasonic CZ-RD52CU Mode D'emploi

To set the timer

DAILY TIMER SETTING
• To turn ON or OFF the unit at a preset time.
1
2
1 • Press once to change the display from
Clock to Timer or vice-versa.
• Press for more than 4 seconds to change
the display from Daily Timer to Weekly
Timer or vice-versa.
2 Select ON or OFF timer
3 Set the time
4 Confi rm
• To cancel ON or OFF timer, press
• Timer operation is based on the clock set in the
remote control and repeats daily once set.
• The timer closest to the current time will be
activated fi rst.
• If timer is cancelled manually or due to power
failure, you can restore the previous setting by
pressing .
4
WEEKLY TIMER SETTING
• Daily timer and weekly timer could not be set at
the same time.
• Promotes energy saving by allowing you to set
up to 6 programmes in any given day.
3
1. Press TIMER
4
display to weekly timer.
2. Press TIMER
day.
3. Press
4. "1" will be blinking, press
1.
5. Press TIMER
.
6. Press TIMER
time.
If you want to set the timer together with your
desired temperature, press
temperature.
7. Press
day will be highlighted with
• After 2 seconds, the display will move to the
next programme. Repeat steps 4 to 7 to set
programmes 2 to 6.
• Same timer programme cannot be set in the
same day.
• During timer setup, if no button is pressed within
30 seconds, or if the
setting at that moment is confi rmed and timer
setup is ended.
for 4 seconds to change
or to select your desired
to confi rm your selection.
to set programme
to select ON or OFF timer.
or to select your desired
to confi rm programme 1. The selected
.
button is pressed, the
to select the