Bosch ErgoMixx Style MS6 Série Mode D'emploi page 10

en Whisk
8. Release the button when the desired
consistency is reached. Wait until
the drive comes to a standstill.
Disconnect the mains plug.
9. Hold down both release buttons and
remove the base unit.
10. Rotate the gear attachment
anticlockwise and remove.
11. Take out the blade.
12. Empty the container.
■ Clean all parts immediately after use.
X "Cleaning and maintenance" see
page 11
Example recipe (CNHR32C):
Honey cake with apples
Honey-apple mixture:
– 130 g forest honey (5 °C)
– 30 g sliced apple cubes (11 mm cubes)
■ Put in universal cutter and mix on Turbo
speed for 2 seconds.
Cake:
– 3 eggs
– 60 g butter
– 100 g plain white flour
– 60 g ground walnuts
– 1 teaspoon cinnamon
– 2 packets vanilla sugar
– 1 teaspoon baking powder
– 1 apple
■ Separate egg yolks from the whites.
■ Beat the egg whites until stiff.
■ Beat the yolks and sugar, then add
softened butter and honey-apple
mixture.
■ In separate container mix flour, ground
walnuts, cinnamon and baking powder.
Mix and incorporate into wet ingredients.
Using spatula, carefully mix in beaten
egg whites.
■ Line a bread baking pan (dimensions
35 cm x 11 cm) with baking paper and
pour in the prepared mixture.
■ Peel the apple and slice it. Put the slices
on top of the cake.
■ Preheat the oven to 180 ºC and bake the
cake for 30 minutes.
10
Whisk
For whipping cream, beating egg whites
and milk froth from hot (max. 70 °C)
and cold milk (max. 8 °C) as well as for
preparing sauces and desserts.
W Risk of scalding!
When processing hot liquids, use a tall, thin
receptacle for blending.
Caution!
– Never insert the whisk into the base unit
without the gear attachment.
– Do not attach or remove the gear
attachment with the whisk until the
appliance is at a standstill.
X Fig. C
1. Place the prepared food in the blender
jug or another suitable receptacle or
process in the cooking pot.
2. Place the gear attachment on the whisk
and press until it clicks into position.
3. Place the whisk with the gear
attachment on the base unit and press
until it clicks into position.
4. Plug the mains plug into the mains.
5. Hold the receptacle with one hand and
immerse the whisk.
6. Press the Turbo button Â. The
appliance remains switched on as long
as the button is pressed.
7. Process the food with the whisk.
8. Release the button when the desired
consistency is reached. Wait until the
drive comes to a standstill. Disconnect
the mains plug.
9. Hold down both release buttons
and remove the whisk with the gear
attachment from the base unit.
10. Remove the gear attachment from the
whisk.
■ Clean all parts immediately after use.
X "Cleaning and maintenance" see
page 11