Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User's instructions
Accessories
This vacuum cleaner is supplied with two accessories:
•
a crevice tool, which you can use to clean radiators,
window frames, crevices, small openings, and similar;
•
a upholstery tool, which you can use to clean soft
surfaces such as upholstered furniture and curtains.
You can store these accessories in the accessory
compartment, see Figure 8.
Figure 8 Storing the accessories
1. Remove the plug from the wall socket.
2. Press the rewind button and keep it pressed in; the power cord will automatically rewind onto the
reel.
PLEASE NOTE
•
Guide the power cord
whilst it rewinds onto
the reel, since otherwise
the cord could become
tangled or the plug
could strike the back of
the appliance. Take hold
of the power cord near
the mark, and allow it to
gently slide through your
fingers back into the
appliance, see Figure 9.
Figure 9 Rewinding the
power cable
3. Stand the vacuum cleaner upright. An attachment slot
for the fixing bracket is fitted to the back of the vacuum
cleaner next to the front castor see Figure 10. Slide the
bottom of the fixing bracket into the slot. This avoids the
need to dismantle the vacuum cleaner after use; you
can store the assembled appliance and retrieve it again
quickly when you need it.
Figuur 10 Stofzuiger opbergen
31
Publicité
Table des Matières
