Hamilton Beach FlexBrew 49960 Mode D'emploi page 4

How to Brew a Single-Serve Pack
1
To open lid, press button and lift.
4
Fill reservoir with cup or travel
mug into which the coffee will
be brewed. 10 oz. of water is the
MAX amount for single-serve
packs.
4
840239403 ENv02.indd 4 840239403 ENv02.indd 4
2
5
Lower lid until you hear a click
sound. This means your lid is
locked in place.
3
Place a pack into the single-serve
pack holder. Do not remove foil.
6
To adjust drip tray/cup rest: Slide
into openings for the position
you want and push down to lock
into place.
Burn Hazard.
w WARNING
To avoid contact with hot coffee
or water:
• Do not fill water above 10-oz.
(296 ml) fill line.
• Fill reservoir with cup or travel
mug of water into which the
coffee will be brewed.
• Fully insert cup or travel mug
on drip tray.
• Do not lift lid during the
brewing process.
w CAUTION Cut Hazard.
Removable single-serve pack
holder has a sharp blade. Piercing
needle on underside of lid also
is sharp. Use caution when
handling.
NOTES:
• Use only cold water in reservoir.
• Do not use hot water.
• Do not reheat coffee in the
machine.
• Do not use creamer or nondairy
creamer in reservoir.
• After brewing hot cocoa single-
serve packs, brew a water-only
cycle without a single-serve
pack to avoid the possibility of
clogging the piercing needle.
1/16/15 11:26 AM 1/16/15 11:26 AM