Step 2 - Install Bottom Cover - Haier HLPW028AXW Guide De L'utilisateur

a
•
Using two or more people, lift the washer off of the packing base and the
molded plastic support.
NOTE: It is possible for the plastic support, under the U bracket, to remain
attached to the bottom of the washer. Make sure it is removed with the foam
base.
2. Inspect the washer, and remove any remnants of packaging, tape or printed
materials before using the washer.
3. Properly dispose of /recycle all packing material.

STEP 2 - INSTALL BOTTOM COVER

Install bottom cover.
Lock all four casters prior to operating washer.
Failure to do so can result in death, electric shock or personal injury.
WARNING
Electrical Shock Hazard
a
Wash Basket Brace
a
a
b
b
Plastic
Support
Foam
Base
11