Maintenance; Cleaning The Cabinet; Notes On Handling A "Memory Stick" Media - Sony MCS1 Mode D'emploi

Maintenance

Cleaning the cabinet

Wipe the outside of the drive with a soft,
dry cloth. To remove stubborn stains,
moisten the cloth with a mild, neutral
detergent. Do not use solvents, cleaning
alcohol, benzene or other substances that
may damage the finish.
Cleaning the disc
• Fingerprints and other contamination on
the disc surface can lead to reading
errors. Always keep the disc clean.
• To clean the disc, lightly wipe it from
the center outwards.
• To remove stubborn stains, lightly
moisten the cloth before wiping the
disc, and use a dry cloth afterwards.
• Do not use benzene, record cleaning
liquid, antistatic fluids or other
substances that may damage the surface
of the disc.
• Never use cleaners on an unused disc.
Use specific CD cleaners to take off
dust.
• You may not be able to write on the
discs if there are scratches or dust on the
unrecorded area. Be careful not to
damage the discs.
GB
30
Notes on Handling
a "Memory Stick"
Media
• Do not touch the connector section or
allow metal objects to come into contact
with it.
• Use only the label designed for the
"Memory Stick" media to attach on its
label space.
• Attach a label only to the designated
labeling space.
• Keep the "Memory Stick" media in the
supplied storage case to carry or store.
• Do not bend, drop or apply a strong
shock to the "Memory Stick" media.
• Do not disassemble or modify the
"Memory Stick" media.
• Keep the "Memory Stick" media away
from water.
• Keep the "Memory Stick" media away
from a location subject to:
– extremely high temperature, for
example, in a car parked in the sun.
– direct sunlight.
– high humidity and corrosive
substances.
• In the following cases, data on the
"Memory Stick" media may be
damaged (erased):
– When the "Memory Stick" media is
removed or the MCS1 is turned off
while data is being read.
– When the "Memory Stick" media is
used in a location subject to static
electricity or electrical noise.