Copying Data From A Usb Storage Media; Verifying Copied Data - Sony MCS1 Mode D'emploi

5
Press the ENTER button.
A confirmation message appears. Press the ENTER button and
finalization of the CD-R starts. When finalization is completed, the
display window changes to "FINISHED".

Copying data from a USB storage media

You can connect a USB storage media to the USB connector of the MCS1,
and copy all the data it contains to CD-R. To do so, follow the same
procedure as the one outlined in "Copying data from a digital still camera"
on page 14.
You can also use the supplied video output cable to connect the MCS1 to
your television and display JPEG files on USB storage media on your
television screen. For details, see "Viewing Digital Images on a Television"
on page 17.
The MCS1 is compatible with Sony USB storage media (USM64D/128D/
256D, USM128E/256E/512E). You can find the latest information about
compatible USB storage media at:
http://www.sony.net/photovault/

Verifying copied data

By comparing the original data and the one copied to CD-R, it is possible to
verify its integrity.
Use the following procedure to configure the MCS1 to perform this
verification automatically when copy ends. If you are unable to perform
this verification from your computer, for example, we recommend
verifying the integrity of your data this way.
Note
Verifying the integrity of the data takes approximately as long as the copy itself.
GB
23