Teac UD-H01 Mode D'emploi page 7

Analog audio output terminals
A
Output 2-channel analog audio signals . Connect the XLR or RCA terminals with the stereo
amplifier or speakers .
Use commercially available cables .
XLR: Balanced XLR cables
RCA: RCA audio cables
Connect the R terminal on this unit to the right (R) terminal of the amplifier and the L terminal on
this unit to the left (L) terminal of the amplifier .
Digital audio input terminals
B
Input digital audio . Connect to the digital audio output terminals of digital audio output devices .
COAXIAL: RCA digital coaxial cable
OPTICAL: Optical digital cable (TOS)
USB input terminal
C
Inputs digital audio from a personal computer . Connect to the USB port of a personal computer .
Use a commercially available USB cable .
Install dedicated TEAC driver software on the computer before connecting the unit . (page 10)
<
Power cord connector
D
Connect the supplied power cord to the power cord receptacle .
After all other connections are complete, connect the power cord's plug to the wall socket .
Do not use any power cords other than the one included with this unit . Use of other
power cords may result in fire or electric shock . Unplug the power cord when you are not
going to use the unit for several weeks .
7