Teac UD-H01 Mode D'emploi page 11

Playing back music files stored in the computer
Connect the unit to the computer using a USB
1
cable.
Use a cable with a connector that fits the USB port on
<
the unit .
Turn the computer power ON.
2
Confirm that the operating system has started properly .
<
Press the POWER button to turn the unit power ON.
3
Press the SOURCE button repeatedly to select
4
"USB".
Start playback of the music file on the computer.
5
Even better sound quality can be achieved by setting
the volume on the computer to maximum and using
the amplifier connected to this unit to adjust the
volume .
Set the volume of the amplifier to the minimum at the
beginning of playback and gradually raise the level .
USB cable
Continued on the next page
11