How To Set: Clock Functions - Zanussi ZOB35301XK Notice D'utilisation

Masquer les pouces Voir aussi pour ZOB35301XK:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

HOW TO SET: CLOCK FUNCTIONS

- flashes when you connect the oven to the electrical supply, when there was a power cut or when
the timer is not set.
Step 1
- press repeatedly.
Step 2
,
After approximately 5 sec., the flashing stops and the display shows the time.
- press repeatedly to change the time of day.
Step 1
Set an oven function and the temperature.
Step 2
- press repeatedly.
Step 3
,
The display shows:
- flashes when the set time ends. The signal sounds and the oven turns off.
Step 4
Press any button to stop the signal.
Step 5
Turn the knobs to the off position.
Step 1
- press repeatedly.
Step 2
,
The function starts automatically after 5 sec.
When the set time ends, the signal sounds.
Step 3
Press any button to stop the signal.
Step 4
Turn the knobs to the off position.
Step 1
- press repeatedly until the clock function symbol starts to flash.
Step 2
Press and hold:
The clock function turns off after few seconds.
10
How to change: Time of Day
- starts to flash.
- press to set the time.
How to set: Duration
- starts to flash.
- press to set the duration.
.
How to set: Minute Minder
- starts to flash.
- press to set the time.
How to cancel: Clock functions
.
- starts to flash.

Publicité

Table des Matières
loading

Table des Matières