How To Remove And Install: Door - Zanussi ZOB35301XK Notice D'utilisation

Masquer les pouces Voir aussi pour ZOB35301XK:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

HOW TO REMOVE AND INSTALL: DOOR

The oven door has two glass panels. You can remove the oven door and the internal glass panel to clean it.
Read the whole "Removing and installing door" instruction before you remove the glass panels.
CAUTION! Do not use the oven without the glass panels.
Step 1
Open the door fully and hold both
hinges.
Step 2
Lift and turn the levers fully on both
hinges.
Step 3
Close the oven door halfway to the first
opening position. Then lift and pull for-
ward and remove the door from its
seat.
Step 4
Put the door on a soft cloth on a stable
surface.
Step 5
Hold the door trim (B) on the top edge
of the door at the two sides and push
inwards to release the clip seal.
Step 6
Pull the door trim to the front to remove
it.
Step 7
Hold the door glass panel by its top
edge and carefully pull it out. Make
sure the glass slides out of the sup-
ports completely.
2
B
1
21

Publicité

Table des Matières
loading

Table des Matières