Clock Functions - Zanussi ZOP27901 Notice D'utilisation

BUTTONS
Button
HEAT-UP INDICATOR
When you activate an oven function, the bars in the
display come on one by one. The bars show
that the oven temperature increases or decreases.

CLOCK FUNCTIONS

CLOCK FUNCTIONS TABLE
Clock function
TIME OF DAY
MINUTE MINDER
DURATION
END
Press again and again to switch
between the clock functions.
To confirm the settings of the clock
functions, press
for an automatic confirmation.
SETTING THE DURATION OR END
1. Set an oven function.
2. Press again and again until the display
shows or .
or flashes in the display.
8
Function
MINUS
CLOCK
PLUS
To set, change or check the time of day. Refer to "Setting the
time".
Use to set a countdown time (maximum 23 h 59 min). This
function has no effect on the operation of the appliance. You
can set the MINUTE MINDER at any time, also if the appliance
is off.
To set how long the appliance operates. Use only when an
oven function is set.
To set when the appliance must deactivate. Use only when an
oven function is set. You can use Duration and End at the
same time (time delay), if the appliance is to be activate and
deactivate automatically later.
or wait 5 seconds
Description
To set the time.
To set a clock function.
To set the time.
Application
3. Press or to the set the values and press
to confirm.
For Duration first you set the minutes and
then the hours, for End
hours and then the minutes.
An acoustic signal sounds for 2 minutes after the
time ends. or symbol and time setting flash
in the display. The oven stops.
4. Press any button to stop the acoustic signal.
5. Turn the knob for the oven functions to the off
position.
first you set the