Specifications - HumanTechnik AUDIOropa PRO LOOP D15 LOS Mode D'emploi

Specifications

Height / Width / Depth:
Weight:
Power supply:
Passive protection:
Maximum area:
Maximum input power:
Loop output
Max. current:
Max. tension:
Connector:
Frequency range:
Distortion:
INPUT 1 and 2:
INPUT 3:
Automatic Gain Control (AGC)
Environmental working range:
Power consumption during idle:
Max. power consumption:
This device complies with the following EC directives:
-
-
-
-
Compliance with the directives listed above is confirmed by the CE seal on the device.
CE compliance declarations are available on the Internet at www.humantechnik.com.
Technical specifications subject to change without prior notice.
45 mm / 215 mm / 220 mm
1.78 kg
110 - 250 Vac, ~ 50 / 60 Hz
Fuse 6.3 A T, not accessible
3300 m² according to IEC 60118-4
< = 944 VA
2x <18 A RMS / 2x >42.4 A peak-to-peak
2x 34 V peak / 2x 94 V peak-to-peak
2x Neutrik NL4 speakON-sockets, layout 1+/1-
100-5000 Hz ( ± 3 dB)
< 1% at rated power output, 1 kHz
0,5 mV to 100 mV / 10 kOhm (MIC)
or 25 mV to 4 V / 10 kOhm (LINE)
Combo-XLR-3 socket (INPUT 1)
Phoenix contact (INPUT 2)
12V toggable phantom power
100V-Input for connecting PA-systems
Dynamics: up to 36dB
0°C - 45°C, up to 2000 metres MASL
17 W, at 230V AC, 2 connected 1 Ω- loops, at room
temperature after 30 min. stabilizing time
260 W
2017 / 2102 / EC RoHS-directive
2012 / 19 / EC WEEE-directive
2014 / 35 / EC Low voltage directive
2014 / 30 / EC Electromagnetic Compatibility
English 37