Fracarro SIG9808CI Instructions D'emploi page 26

Display), enter the HEADEND SETUP -> OSD NAVIGATION and confirm it with the
IMPORTANT: Press the TPE
from the last modifications, the set data will be lost.
NOTE: if, during programming, the word "Wait..." often appears (for example, while channels are scrolled),
decrease the TPE programmer TIMEOUT to 3 seconds instead of 30 sec. To carry out this procedure, enter
the "TPE SETUP" – "TIMEOUT COM" menu and set it to 3 (see page 27 for the TPE SETUP menu).
In order to program and interpret the programming menu of the following flow-charts, refer to the following
tables:
TPE keys
......
Graphic indications of the
menu diagrams
INPUT CHANNEL
OUTPUT CHANNEL
RF LEVEL
INPUT CHANNEL
OUTPUT CHANNEL
RF LEVEL
key to save the settings. If this key is not pressed within 5 minutes
To confirm an entered value or to select a menu
To cancel an entered value or exit a menu
Select the menu by using
Scroll the menu to the right
Scroll the menu upwards
Scroll the value to the right
4.1 DEFAULT PROGRAMMING
RECEIVER 1 RECEIVER 2
E35 24FR E35 24FR
E21
10
RECEIVER 5 RECEIVER 6
E23 RAi notizie E23 Rai sport
E25
10
Key Function
To scroll through menu items
To enter values
To save the modifications
Meaning
or keys and exit with the
RECEIVER 3
E58 BBCWORLD
E22 E23
10 10
RECEIVER 7
E65 La 7
E26 E27
10 10
26
key.
or to the left
or downwards
or to the left
RECEIVER 4
E58 Italia 1
E24
10
RECEIVER 8
E65 La7
E28
10
key