Product Features; Technical Data; Declaration Of Conformity - Bosch GBH 2 RE Professional Instructions D'emploi

OBJ_BUCH-265-001.book Page 15 Wednesday, November 22, 2006 10:58 AM
The vibration emission level given in
WARNING
this information sheet has been
measured in accordance with a standardised test
given in EN 60745 and may be used to compare one
tool with another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may
increase above the level given in this information sheet.
This could lead to a significant underestimate of expo-
sure when the tool is used regularly in such a way.
Note: To be accurate, an estimation of the level of
exposure to vibration experienced during a given period
of work should also take into account the times when
the tool is switched off and when it is running but not
actually doing the job. This may significantly reduce the
exposure level over the total working period.

Product Features

The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 SDS-plus tool holder
2 Dust protection cap
3 Locking sleeve
4 Rotational direction switch
5 Lock-on button for On/Off switch
6 On/Off switch
7 Selector switch for drilling/hammer drilling
8 Release button for drilling/hammer drilling
selector switch
9 Button for depth stop adjustment
10 Depth stop
11 Auxiliary handle
12 Securing screw for key type drill chuck*
13 Key type drill chuck*
14 SDS-plus adapter shank for drill chuck*
15 Extraction sleeve of the dust extraction
attachment*
16 Clamping screw for the dust extraction
attachment*
17 Depth stop of the dust extraction attachment*
18 Telescopic pipe of the dust extraction
attachment*
19 Wing bolt of the dust extraction attachment*
20 Guide pipe of the dust extraction attachment*
21 Universal bit holder with SDS-plus shank*
*The accessories illustrated or described are not
included as standard delivery.
1 619 929 773 • 22.11.06

Technical Data

Rotary Hammer
Article number
Speed control
Right/left rotation
Rated power input
Impact frequency at rated
speed bpm
Impact energy per stroke
Rated speed rpm
Tool holder
Spindle collar diameter mm
Drilling diameter, max.:
– Concrete mm
– Brickwork (with
core bit) mm
– Steel mm
– Wood mm
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific coun-
tries, these values can vary.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.

Declaration of Conformity

We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents:
EN 60745 according to the provisions of the direc-
tives 89/336/EEC, 98/37/EC.
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
06.11.2006, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
GBH 2-23 RE
PROFESSIONAL
3 611 B50 4..
W 650
0–4400
J 0–2.5
0–1000
SDS-plus
43 (Euro-Norm)
23
68
13
30
kg 2.3
/ II
English | 15