Helpful Tips - Redmond RMC-M13A Manuel De L'utilisateur

To Clean Cooking Chamber
Compliance with the user manual guidelines minimizes the risk of food particles or liquid accumulating inside the chamber. However, if the inside of
the chamber gets dirty, clean it to prevent improper operation or malfunction of the appliance.
Before cleaning the chamber make sure, that the appliance is unplugged and has cooled down!
The surface of the cooking chamber, heating disk, and casing of the central thermal sensor (located in the middle of the heating disk) need to be
cleaned with a damp (not wet!) sponge or cloth. Remove any traces of soap or detergent, if using any, to prevent extraneous odors while cooking.
If there is a foreign object in the cavity around central thermal sensor, carefully remove it using tweezers, trying to avoid pressing on the casing of
the sensor.
Clean heating disk with a damp medium-hard sponge or synthetic brush, if required.
When the appliance is used on a regular basis, the heating disk may partially or completely change color, which does not indicate a defect and does not
affect operation of the unit.
To Store the Appliance
Unplug the appliance. Make sure that the chamber, heating disk, bowl, inner lid, steam valve, and condensation collector are dry and clean.
You may store all additional accessories inside the removable bowl for easy and compact storage.
VI. HELPFUL TIPS
This chapter familiarizes you with the practical tips and solutions to some common problems you may experience when using the multicooker.
THE DISH IS UNDERCOOKED
Possible Causes
The lid of the device was either open or was not closed prop-
erly
The temperature was not reached because the bowl and the
heating element did not fit tightly to-gether
Wrong ingredients or settings were chosen.
General proportions were not observed, the size of the ingre-
dients was too large.
Wrong time settings.
The chosen recipe is not appropriate for the device
Try to avoid opening the lid while cooking.
Close the lid until it clicks into place. Make sure that the rubber sealing ring located on the inner side of
the lid is not deformed or damaged in any way
There should not be any foreign objects between the lid and the housing of the device, remove if any.
Always make sure that the heating element is clean and fits tightly together with the bowl before cooking
We recommend using recipes adjusted for the device. Choose proven recipes only.
Set the time and program, choose ingredients, proportions, and the size of ingredients according to the
recipe
RMC-M13A, RMC-M23A, RMC-M33A
Solving the Problem
ENG
15 15