Parts List - KIKKA BOO PASTELLO Mode D'emploi

WARNINGS
• This product is suitable for children aged from 6 to 36 months except for who are over 3 years old or weighed more than 20kg.
• Please read this manual carefully before using it and keep it for future reference.
• Failure to follow these instructions may affect the safety of children.
• Do not leave your child unattended.
• This product is suitable for children aged 6-36 months.
• If the chair is damaged, torn or missing anywhere, please do not use it.
• Ensure that all users are familiar with the operating methods of the product and that the product can be easily opened and closed. If
not, please read the instructions carefully and use the correct method.
• Before using the dining chair, please carefully check that all parts are installed and adjusted correctly to ensure that all locking devices
are in lock state.
• When riding, children must use seat belts to prevent the baby from falling off or slipping out of the dining chair, causing serious injury.
Please do not use this product when your baby cannot sit up on his own.
• When your baby is in the dining chair, do not remove any part of the chair or any part of the mediation chair.
• Don't let your baby climb, play or hang in a dining chair alone.
• This product can only be used on flat and stable ground, and do not place heavy items on the plate to prevent chair from turning over.
Avoid placing dining chairs near heat sources, such as electric heaters, gas heaters, or any place where the baby can be exposed to
dangerous goods.
• Be sure to remove all plastic bags and packaging materials before use to prevent the risk of asphyxiation.
• When used by a child, animals should not be placed under the product to avoid danger.
I. PARTS LIST
1. Back angle adjustment button; 2. Seat belt xing hole position; 3. Sleeve xing hook; 4. Seat height adjustment button; 5. Frame
closing button; 6. Plate hook; 7. Under frame; 8. Five point seat belt ; 9. Service plate; 10. Plate mounting button; 11.Cleat; 12.Foot angle
adjustment button; 13.Pedal; 14.Foot tube;
II. HOW TO OPEN OR FOLD THE CHAIR
1. Take the product out of the box. (please handle the bag properly) hold down the seat height adjustment button and raise the seat
upward.
2. Press and hold down the two folding buttons on the pin and unroll the hose back to maximum state, release the button and con rm
that it is locked.
3. Instead, press and hold the two folding buttons on the hose forward and close the rear pin to the button lock state.
III. HOW TO ADJUST THE TABLE PLATE
1. The adjusting handle at the bottom of the candle plate outside, while the mounting tube on the tray is inserted at the hole in the
armrest, inserted into the bottom, released, pulled back to con rm that the plate is in place.
2. Pull the adjusting handle at the bottom of the plate outward, pull the plate slightly outward, release the handle, and continue pulling
when you hear a "click" to prove that the plate is stuck in the second gear; conversely, the reverse adjustment can bring the plate back to
the rst gear, The plate can be adjusted in two les.
3. Pull out the adjusting handle at the bottom of the plate, pull the plate outward, and turn the plate upside down when you see the red
dot. When thechair is in normal use, the plate must not be removed to avoid holding hands by the child. When thechair is not in use, the
plate can be removed from the plate buckled from the rear pin.
ENGLISH