Attaching And Detaching Accessories; Use - DS Produkte MC607-1 Mode D'emploi

• Round brush nozzle: The round brush nozzle is suitable for cleaning all uneven ob-
jects, furniture, lamps, profi les and skirting boards, window ledges, etc.
• Adapter: The adapter is required to attach the mini-turbo nozzle to the device.

Attaching and Detaching Accessories

PLEASE NOTE!
■ Before you attach or detach any accessories, ensure that the device is not connected
to the mains power.
Nozzles
• The nozzles are inserted up to the limit stop into the suction opening (6) on the dust
container (5).
• For using the mini-turbo nozzle plug the adapter into the suction opening fi rst.
• To detach the nozzles, pull them out of the suction opening.
Rod with Handle
• If the device is to be used as a fl oor vacuum cleaner, plug the rod with handle (12) into
the connection opening on the motor housing. It must engage audibly.
• To detach the rod with handle, press the release button (11) and pull the rod out of
the motor housing.

Use

1. Depending on whether the vacuum cleaner is to be used as a handheld vacuum
cleaner or a fl oor vacuum cleaner, insert or detach the rod with handle (12) as re-
quired.
2. Insert the nozzle you want into the suction opening (6) (see chapter "Attaching and
Detaching Accessories").
3. Unwind the mains cable to its full length and insert the mains plug into a properly
installed plug socket that is easily accessible.
4. Move the On / Off switch (9) to position I to switch on the vacuum cleaner.
5. Guide the nozzle over the surface to be cleaned.
6. After vacuuming, move the On/Off switch to the 0 position to switch off the device.
7. Remove the mains plug from the plug socket.
8. To ensure optimum performance of the device, empty the dust container (5) and
clean the fi lters after every use.
17
2in1 - brush and crevice nozzle: The crevice nozzle is suitable for
cleaning all nooks and crannies that cannot be reached with the
other nozzles (e.g. between upholstery). It has a fold-out brush
attachment for cleaning sensitive items such as keyboards.
There is an arrow mark on the crevice nozzle. To turn the
crevice nozzle into a brush nozzle, all you have to do is
fold the end of the crevice nozzle in the direction marked
by the arrow.
EN