Sony MPK-DVF6 Mode D'emploi page 18

Preparations (continued)
For DCR-TRV900/TRV900E/TRV890E/TRV118E/TRV116E/TRV50/
TRV50E/TRV40/TRV40E/TRV30/TRV30E/TRV27/TRV27E/TRV25/
TRV25E/TRV24E/TRV20/TRV20E/TRV18/TRV18E/TRV17/TRV17E/
TRV16/TRV16E/TRV15/TRV15E/TRV11/TRV11E/TRV10/TRV10E/
TRV9/TRV9E/TRV8/TRV8E/TRV6/TRV6E
1
Install the camcorder to the marine pack.
Connect the remote plug and the
microphone plug.
1 Connect the microphone plug to
2 Connect the remote plug to the
2
Insert the camcorder until the
mounting shoe clicks into place.
3
Connect the monitor cord to the
jack of camera mounting shoe B.
18
-GB
the MIC jack (plug in power).
LANC jack.
The cords are placed in the
plug holders of the marine
pack at the factory. Pull the
plugs out of the holders when
in use.
2 to the LANC jack
front shell
1 to the MIC jack
(plug in power)